Stainless Steel Digital Vernier Caliper 6 inch “150mm measuring instrument Vernier Calipers

The slider can be moved only after the locking screw is loosened.

Wipe all the measuring faces and clean caliper, using a damp cloth.

Check to see if all the buttons, switches, and the LCD display respond well.

Loosen the locking screw.

Switch the unit on with a press on the “ON” button.

Then select the unit system needed by pressing Inch! Metric button. (Each time the button is pressed, inch and metric digits will be displayed alternatively).

Apply normal measuring pressure on the slider to close the external measuring jaws. Then press the “Zero” button to reset the display to zero.

Keep the caliper clean and dry (Liquid can damage the slider).

Faces should be cleaned gently with cotton fabrics. Never use petrol, acetone, and other organic solutions.

In order to save power, turn off the unit when the caliper is going to stay idle for some time.

Never apply any electric pressure on any part of the caliper and never use an electronic pen so as not to damage ist’ chip.

The flashing of digits shows a flat battery. Take off the battery cover in the direction shown by the arrow and replace the battery (positive the side facing up).